Tax:+886-4-26201610 | |
Fax:amyHsu@ypro.com | |
Add:No. 158, Wucuo Rd., Qingshui Dist., Taichung City 436, Taiwan (R.O.C.) |
• Supports Auto Device Routing for easy configuration
• Supports route by TCP port or IP address for flexible deployment
• Converts between Modbus TCP and Modbus RTU/ASCII protocols
• 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports
• 16 simultaneous TCP masters with up to 32 simultaneous requests per master
• Easy hardware setup and configuration
The MB3180, MB3280, and MB3480 are standard Modbus gateways that convert between Modbus TCP and Modbus RTU/ASCII protocols. Up to 16 simultaneous Modbus TCP masters are supported, with up to 31 RTU/ASCII slaves per serial port. For RTU/ASCII masters, up to 32 TCP slaves are supported.
The three standard MGate™ models (MB3180, MB3280, and MB3480) are designed for easy integration of Modbus TCP and RTU/ASCII networks. With these models, Modbus serial slave devices can be seamlessly incorporated into an existing Modbus TCP network, and Modbus TCP slaves can be made accessible to serial masters. The MB3180, MB3280, and MB3480 offer features that make network integration easy, customizable, and compatible with almost any Modbus network.
The MGate™ MB3000 gateways can effectively connect a high density of Modbus nodes to the same network. The MB3280 can manage up to 62 serial slave nodes, and the MB3480 can manage up to 124 serial slave nodes. Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway.
Moxa's Auto-Device Routing function helps eliminate many of the problems and inconveniences encountered by engineers who need to configure large numbers of Modbus devices. A single mouse click is all that's required to set up a slave ID routing table and configure Modbus gateways to automatically detect Modbus requests from a supervisory control and data acquisition (SCADA) system. By removing the need to manually create the slave ID routing table, the Auto-Device Routing function saves engineers significant time and cost.
Ethernet Interface | |
10/100BaseT(X) Ports (RJ45 connector) | 1 (Auto MDI/MDI-X connection) |
Magnetic Isolation Protection | 1.5 kV(built-in) |
Ethernet Software features | |
Industrial Protocols | Modbus TCP Client (Master),Modbus TCP Server (Slave) |
Configuration Options | All models: Web Console (HTTP), Device Search Utility (DSU), MGate Manager, MCC Tool, Telnet Console MGate MB3280/MB3480 only: Web Console (HTTPS) |
Management | All modesl: ARP, DHCP Client, DNS, HTTP, SNMPv1/v2c/v3, TCP/IP, Telnet, UDP MGate MB3280/MB3480 only: HTTPS, SMTP, SNMP Trap, NTP Client |
MIB | RFC1213、RFC1317 |
Time Management | NTP Client (MGate MB3180 Excluded) |
Serial Interface | |
No. of Ports |
MGate MB3180:1 MGate MB3280:2 MGate MB3480:4 |
Connector | DB9 male |
串口Standards | RS-232/422/485(software selectable) |
Baudrate | 50 bps to 921.6 kbps |
Data Bits | 7,8 |
Parity | None, Even, Odd, Space, Mark |
Stop Bits | 1,2 |
Flow Control | DTR/DSR, RTS Toggle (RS-232 only), RTS/CTS |
RS-485 Data Direction Control | ADDC® (automatic data direction control) |
Pull High/Low Resistor for RS-485 | 1 kilo-ohm, 150 kilo-ohms |
Terminator for RS-485 | MGate MB3180:無 MGate MB3280/MB3480:120 ohms |
Serial Signals | |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w | Data+, Data-, GND |
RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
Serial Software features | |
Industrial Protocols | Modbus RTU/ASCII Master、Modbus RTU/ASCII Slave |
Modbus(Transparent) | |
Max. No. of Client Connections | 16 |
Max. No. of Server Connections | 32 |
Power Parameters | |
Power Parameters | 12 to 48 VDC |
Input Current | MGate MB3180:200 mA @ 12 VD MGate MB3280:250 mA @ 12 VD MGate MB3480:385 mA @ 12 VDC |
Power Connector | MGate MB3180:Power jack MGate MB3280/MB3480:Power jack and terminal block |
Physical Characteristics | |
Housing | Metal |
IP Rating | IP30 |
Dimensions(with ears) | MGate MB3180:22 x 75 x 80 mm(0.87 x 2.95 x 3.15in) MGate MB3280:22 x 100 x 111 mm(0.87 x 3.94 x 4.37in) MGate MB3480:35.5 x 102.7 x 181.3 mm(1.40 x 4.04 x 7.14in) |
Dimensions(without ears) | MGate MB3180:22 x 52 x 80 mm(0.87 x 2.05 x 3.15in) MGate MB3280:22 x 77 x 111 mm(0.87 x 3.03 x 4.37in) MGate MB3480:35.5 x 102.7 x 157.2 mm(1.40 x 4.04 x 6.19in) |
Weight | MGate MB3180:340 g (0.75 lb) MGate MB3280:360 g (0.79 lb) MGate MB3480:740 g (1.63 lb) |
Environmental Limits | |
Operating Temperature | 0 to 60°C(32 to 140°F) |
Storage Temperature (package included) | -40 to 85°C(-40 to 185°F) |
Ambient Relative Humidity | 5 to 95%(non-condensing) |
Standards and Certifications | |
Safety | EN 60950-1,UL 60950-1 |
EMC | EN 55032/24 |
EMI | CISPR 32,FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD:Contact:4 kV;Air:8 kV IEC 61000-4-3 RS:80 MHz to 1 GHz:3 V/m IEC 61000-4-4 EFT:Power:1 kV;Signal: 0.5 kV IEC 61000-4-5 Surge:Power:1 kV (MB3180/MB3280) IEC 61000-4-5 Surge:Power:1 kV;Signal:2 kV (MB3480) IEC 61000-4-6 CS:3 V IEC 61000-4-8 PFMF IEC 61000-4-11 DIP |
MTBF | |
Time | MGate MB3180:908,440hrs MGate MB3280:749,455hrs MGate MB3480:1,242,173hrs |
Standards | Telcordia SR332 |
Warranty | |
Warranty Period | 5 years |